Unconstrained corrugated compensator

Unconstrained corrugated compensator
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The bellows in the unconstrained compensator are single-layer, double-layer or multi-layer U-shaped. The bellows and guide sleeves are made of 1Cr18Ni9Ti austenitic stainless steel and other materials are low carbon steel or low alloy steel. Unconstrained compensators are identical to conventional axial compensators in determining the distance between fixed supports and calculating the thrust of fixed supports. The unrestrained expansion joint also greatly loosened the installation requirements in addition to the cancellation of stretching work. Unrestrained expansion joints can be installed in the pipeline like a short tube, without the need to cut the length of the pipeline and expansion joints equal to the length of the pipeline after the entire line of steel pipes are joined as required by other axial expansion joints. It is also convenient for transportation, installation and thermal insulation due to unrestrained expansion and strong shell.

Performance characteristics

1. The determination of the distance between the fixed supports and the calculation of the thrust of the fixed supports of the unconstrained corrugated compensator are exactly the same as those of the conventional axial compensator. In order to make the project stable and reliable, the unconstrained compensator requires three guide brackets in each fixed bracket space besides the installation near the fixed bracket.

2. Unconstrained compensator can be used in overhead and trench laying of pipeline, and can also be used in direct buried laying with compensation. At this time, unconstrained compensator should be set up inspection well or darkroom.

3. Unconstrained corrugated compensator is used for axial compensation of pipeline. It has large compensation amount, strong self-steering and super bending resistance, so it can simplify the design of pipeline guide bracket, and make the distance between guide bracket can be adjusted arbitrarily.

Main data


公称通径mm
波数
轴向补偿量mm/轴向刚度N/mm
you效面积cm2
接管尺寸
产品长度mm
0.6Mpa
1.0Mpa
1.6Mpa
2.5Mpa
100
6
34/277
33/417
33/417
32/817
121
ф108×4
410
10
56/166
56/250
54/250
50/409
492
20
112/83
112/125
108/125
100/205
712
125
5
36/272
36/408
35/408
33/801
180
ф133×4
410
9
65/151
65/227
63/227
60/401
412
18
130/76
130/114
126/114
120/201
711
150
5
49/200
48/300
45/456
44/845
257
ф159×4.5
433
8
78/125
77/188
71/286
65/423
518
16
156/63
154/94
142/143
130/211
756
200
4
56/193
56/288
56/480
55/800
479
ф219×6
475
6
85/128
85/192
84/320
80/927
533
12
170/64
170/96
168/160
160/200
800
250
4
74/343
63/588
53/930
50/1856
769
ф273×8
500
6
110/228
95/392
80/620
78/927
620
12
220/114
190/196
160/310
156/464
984
300
4
72/503
65/830
57/1253
54/2142
1105
ф325×8
584
6
109/335
97/553
85/835
80/1071
713
12
218/168
194/277
170/418
160/536
1116
350
4
78/523
72/840
64/1265
62/2684
1307
ф377×10
614
6
117/348
107/560
97/843
90/1342
759
12
234/174
241/218
194/442
180/671
1216
400
4
73/458
70/918
65/1373
63/3675
1611
ф426×10
625
6
109/305
102/612
97/915
90/1838
771
12
218/153
204/306
194/458
180/920
1225
450
4
96/405
82/690
69/2305
65/4350
1972
ф478×10
620
6
144/270
124/460
103/1537
90/2175
762
12
288/135
248/230
206/769
180/1087
1200
500
4
100/423
84/728
70/2452
65/4256
2445
ф529×10
624
6
149/282
126/485
105/1635
90/2128
766
12
298/141
252/243
210/818
180/1064
1216
600
4
121/530
86/1468
99/1740
95/2842
3534
ф630×10
676
6
181/353
148/978
140/1160
120/1420
848
12
362/177
358/489
280/580
240/710
1382
700
4
126/573
87/1625
85/2972
84/4100
4717
ф720×10
708
6
188/382
168/1083
131/1982
120/2050
882
12
376/191
336/542
262/991
240/11025
1422
800
4
126/620
84/1778
85/3183
84/6234
5822
ф820×10
724
8
252/310
168/889
170/1591
168/3117
1071
12
378/207
252/596
241/1061
236/1558
1538
900
4
149/758
118/1329
117/2575
7620
ф920×10
792

8
298/379
236/664
234/1288
1211

12
447/253
351/443
354/825
1650

1000
4
140/845
115/2770
90/5038
9043
ф1020×10
800

8
280/423
230/1385
180/2519
1200

12
420/282
345/923
270/1679
1616


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.Unconstrained corrugated compensatorPlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!